Hydraulic Crimper for All Types of Coin Cells XE-SF120
Need a bulk order? Request a competitive quote today!
It is mainly used in the research and development of laboratory battery materials for button battery, capacitor research and sealing, and can also be used for small batch trial production in factories. Different molds can be used for battery disassembly, pole piece pressing, battery compaction and other operations.
Applications:
- Battery lab/ Battery research.
- Lithium ion battery lab
- Material research
- Trial-production
Main features
* The lower die adopts high-precision positioning ring limit to control the height of the battery package, so as to avoid damage to the sealing cup in case the package pressure is too large and unstable.
* The inner ring of the upper mold sealing cup is provided with a screw spring top center mechanism to ensure that the battery cannot be removed when the battery is sealed. Just twist the top screw to force the button battery out.
* Built-in safety overflow valve, can adjust the pressure as needed, and can set the upper pressure limit to prevent damage caused by excessive pressure caused by misoperation, ensuring the safety of the machine.
* Inline pressure gauge can observe and accurately control the sealing pressure.
* Hydraulic drive, pressure up to 8T, battery seal without vibration, no leakage.
* Specially designed hydraulic structure for low effort.
* Precise mold design ensures accurate and reliable sealing and solid steel structure design, stable and safe to use.
* Small size, easy to operate, can be placed in the glove box.
* Beautiful appearance, easy maintenance, small size, convenient operation, accurate molding and so on.
Specifications:
- Battery placement: In the mold opening state, put the battery into the lower mold positioning groove, the negative side is facing up, put it straight, hold the oil discharge valve hand wheel, screw it clockwise, rotate to the limited position can.
- Battery sealing: The hand crank is constantly swaying up and down, and the jack rises and presses the moving template to close the mold. When the pressure gauge reading of the package pressure is about 80-100kg/cm2, the battery package is realized.
- Remove the battery:hold the oil discharge valve handwheel and turn it a half turn counterclockwise, the sealing mold will open automatically. After the mold is opened, the battery can be taken out. (The hand wheel has a limit point in the direction of the reverse direction, which can be detached from the rotation and cause the ball seal ring of the oil discharge valve to escape, and the oil leakage phenomenon).
- Battery seal height limit adjustment:Loosen the 4-machine meter screw on the side of the seal limit nut, and adjust the height by rotating the nut to limit the height of the battery seal. After adjusting, tighten the side machine screw.
| Model | Coin Cell Crimping Machine XE-SF120 |
| Features | Heavy duty steel frame
PTFE Anti-Corrosion Core prevents coin cells from being short-circuited |
| Crimping Die | One set of crimping die for CR2032, CR2025, and CR2016
Die is consumable, please contact supplier to order replacement if need. 100 sets Coin cell cases (CR2032 cases) are included in the package for testing and immediate use Optional die available from product option for crimping CR2325, CR2450, AG3, AG5 |
| Pressure | Max. 8 metric Tons hydraulic pump with automatic pressure relief
Recommended CR20XX series coin cell sealing pressure: 850 -1000psi Effective piston area: 11.34 cm^2 |
| Product Weight & Dimensions | Net Weight: 26 kg (58 lbs)
223 * 170 * 325mm |
| Compliance | CE Certified |
| Warranty | One Year limited warranty with lifetime support (Rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty) |
| Maintenance & Equipment Care | Electrolytes are highly corrosive materials, therefore, the die set must be cleaned with ethanol after the completion of each experiment in order to avoid any corrosion damages. Also turn the hydraulic valve to Lock position when not in use.
Please be aware of that MREBEST will not be liable for any losses/damages from improper use, improper care & maintenance and abuse of the product. |
| Application Notes | Attention: The built-in small hydraulic pump is not designed for holding high pressure. The pressure inside will be released gradually after reaching 50~80 Kg/cm^2, (which is sufficient for assembling the coin cell).
Access to the Over-pressure limit screw by removing the front panel |
| Package Size and | 360*320*430mm |
| Gross Weight | 35kg |
