Dispersan VL-2060
SKU: XN-DISP-VL2060
Dispersant VL-2060 for Battery Electrode Slurries (XN-DISP-VL2060) — carbon-based electrode dispersant; promotes uniform active material distribution in electrode slurries; specific surface area 60–80 m²/g; Fe ≤ 20 ppm; shelf life 24 months sealed.
Need a bulk order? Request a competitive quote today!
Name: Dispersant VL-2060 for Battery Electrode Slurries
Material Type: Carbon-Based Electrode Slurry Dispersant
Product Code: XN-DISP-VL2060
Product Introduction:
Dispersant VL-2060 is a dispersant for battery electrode slurry systems. Its molecular structure enables directional adsorption on the surface of active material particles, promoting uniform dispersion of active materials in the electrode slurry. It improves electrode uniformity, reduces active material agglomeration, and supports improved lithium-ion and electron transport paths — contributing to better cycle performance and rate performance of battery electrodes.
Key Features:
Electrode slurry dispersant — promotes uniform distribution of active materials
Improves electrode uniformity and reduces thickness/density inconsistencies
Reduces local agglomeration to improve lithium-ion transport and cycle life
Improves rate performance by enabling smoother electron and ion transport paths
Specific surface area 60–80 m²/g; apparent density 0.04–0.08 g/cm³
Low impurity content: Fe ≤ 20 ppm, Co/Ni/Cu/Cr/Zn ≤ 5 ppm, magnetic metal ≤ 5 ppm
Shelf life 24 months (sealed)
Technical Specifications:
| Parameter | Specification | Detection Method |
|---|---|---|
| Appearance | Black powder | Visual inspection |
| Moisture (%) | ≤ 0.8 | Differential thermal method |
| Specific Surface Area (m²/g) | 60–80 | BET nitrogen adsorption |
| Ash Content (%) | < 0.1 | Ignition method |
| Apparent Density (g/cm³) | 0.04–0.08 | Measuring cylinder weighing method |
| Impurity: Fe (ppm) | ≤ 20 | Atomic absorption |
| Impurity: Co (ppm) | ≤ 5 | Atomic absorption |
| Impurity: Ni (ppm) | ≤ 5 | Atomic absorption |
| Impurity: Cu (ppm) | ≤ 5 | Atomic absorption |
| Impurity: Cr (ppm) | ≤ 5 | Atomic absorption |
| Impurity: Zn (ppm) | ≤ 5 | Atomic absorption |
| Magnetic Metal (ppm) | ≤ 5 | Atomic absorption |
| Shelf Life (sealed) | 24 months | — |
Storage & Handling:
Store sealed between 5 °C and 45 °C. Keep humidity below 85%. Avoid direct sunlight. If the material cannot be used up after opening, reseal promptly.
Note: Specifications are for reference only. Actual dispersant performance depends on CNT type, concentration, solvent quality, mixing method, and application conditions. For carbon nanotube conductive slurries and powders, see Xnergy’s Conductive Additives category. For electrode binder systems, see Binders.
