Pouch Cell Final Vacuum Sealing Machine With Auto Piercing Function
Need a bulk order? Request a competitive quote today!
Model:XE-BFZ200
XE-BFZ200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation.
Features:
- With piercing needle, piercing function can be completed automatically.
- Sealing blade is made from copper with good heat conduction.
- Upper and lower sealing blade sealing pressure can be adjusted.
- Upper and lower sealing blade temperature be controlled separated and settable, digital display by thermostat.
- The lid can go down only by pressing the 2 start buttons at the same time to avoid hands get injured.
- Touch screen operation, high automation.
- Sealing time can be set.
- Through perspective window to observe it during working.
- The lid will open automatically when it finished sealing.
Specifications:
| Model | Pouch Cell Final Sealing Machine XE-BFZ200 |
| Sealing head temperature | RT-250℃,adjustable |
| Temperature control precision | ±1.5℃ |
| Heat sealing pressure | 0-7kg/cm2,adjustable |
| Heat sealing time | 0-99 second,adjustable |
| Sealing width | 5mm,adjustable |
| Vacuum degree | -90Kpa ~ 0 adjustable (vacuum pump optional) |
| Voltage | 220V/50Hz |
| Power | 300W heat pipe,
heating when the power consumption of about 0.6KW |
| Compressed air source | 0.5-0.7Mpa |
| Size | L500mm*W500mm*H700mm |
| Head parallelism | with triple carbonless paper, head pressure at 0.6MPa, the temperature at 200 ℃ when the seal out of the seal |
| Air consumption | about 0.2L compressed gas / each time |
| Pneumatic working speed | ≥ 180 times / h |
| Dimension | 515mm * 350mm * 505mm |
| Weight | 56kg |
