LNMO (LiNi₀.₅Mn₁.₅O₄) Cathode Electrode Sheet（Multiple Specs）

Name: LNMO (LiNi₀.₅Mn₁.₅O₄) High-Voltage Cathode Electrode Sheet

Material Type: LNMO Spinel Lithium Nickel Manganese Oxide on Carbon-Coated Aluminum Foil

Product Code: XN-LNMO-ES

Product Introduction:

LNMO (LiNi₀.₅Mn₁.₅O₄) is a spinel-type high-voltage cathode material with a nominal operating plateau at approximately 4.7 V vs. Li/Li⁺, significantly higher than conventional NCM or LFP cathodes. This electrode sheet features LNMO active material coated on carbon-coated aluminum foil with a reference specific capacity of 125 mAh/g. Active material loading options of 2, 3, or 5 mg/cm² are available, with active material content of 80% or 90%.

Key Features:

LNMO (LiNi₀.₅Mn₁.₅O₄) active material — high-voltage spinel cathode (~4.7 V vs. Li/Li⁺)
Reference specific capacity 125 mAh/g
Current collector: carbon-coated aluminum foil, 1 + 15 + 1 μm, 4.14 mg/cm²
Active material loading: 2 / 3 / 5 mg/cm² (other loadings available on request)
Active material content: 80% or 90%
Electrode size: 7 × 7 cm (customization supported)
Multiple specifications available — customization supported

Main Specifications:

Notes:

Active material loading is calculated as: (weight of punched electrode − weight of current collector) × active material content %.

Storage & Handling:

Store sealed in a cool, dry, low-humidity environment. After opening, reseal immediately and store in a glove box or in a drying oven at 60°C. Handle by the edges to avoid contaminating the active coating.

Note: Specifications are for reference only. Actual electrochemical performance depends on counter/reference electrode selection, electrolyte, separator, cell assembly conditions, and cycling protocol. For anode electrode sheets, see the Anode Materials category. For electrolytes, see the Electrolytes category. For coin cell assembly components, see Coin Cells & Hardware.