BTR M2-S Single-Crystal Ni83 NCM Cathode Material 1kg

Name: BTR M2-S Single-Crystal Ni83 NCM Cathode

Material Type: Single-Crystal High-Nickel NCM Cathode Material (Ni83)

Product Code: M2-S

Brand: BTR

Product Introduction:

The BTR M2-S is a single-crystal high-nickel NCM cathode material (Ni83) characterized by high safety, high gravimetric capacity, and excellent cycle life. The single-crystal morphology improves structural integrity under high-voltage cycling, reduces particle cracking during calendering and long-term cycling, and lowers side reactions with electrolyte versus polycrystalline high-nickel NCM. The BTR M2-S (Product Code: M2-S) is suitable for 4.3 V applications and is well-matched to research and small-batch production of lithium-ion cells targeting high energy density combined with extended cycle life and improved thermal stability.

Key Features:

Single-crystal Ni83 morphology — high safety, high capacity, excellent cycle life
First-cycle discharge capacity 210.2 mAh/g at 0.1C, 3.0–4.3 V (room temperature)
First-cycle efficiency 89.6% at 0.1C, 3.0–4.3 V (room temperature)
Capacity retention 91.7% after 50 cycles at 0.5C/1C, room temperature
High-temperature performance — 222.2 mAh/g at 45°C, 93.0% retention after 50 cycles
D50 3.6 μm, S.S.A 0.65 m²/g — well-suited to slurry processing
Low surface lithium residues — LiOH 0.21 wt%, Li₂CO₃ 0.09 wt%
XRD-verified NMC phase purity, suitable for high-voltage cathode applications

Physical & Chemical Properties:

SEM Morphology:

SEM imaging confirms well-developed single-crystal particle morphology with smooth facets and a uniform particle size distribution. The single-crystal microstructure provides the mechanical robustness and cycling stability advantages characteristic of single-crystal high-nickel NCM versus polycrystalline high-nickel NCM.

SEM at low magnification (100 μm scale bar):

SEM at high magnification (2 μm scale bar):

Electrochemical Performance — Room Temperature (Coin Cell, 3.0–4.3 V):

Electrochemical Performance — 45°C (Coin Cell, 3.0–4.3 V):

Full-Cell Application (Pouch Cell 554065, 2.1 Ah):

Cell Design

Electrode Formulation

Compaction Density vs. Pressure

Pouch Cell Capacity (1C Discharge)

First-cycle full-cell efficiency 84.8%; internal resistance 30.1 mΩ.

Values measured by Xnergy. Typical values for reference; not guaranteed unless otherwise specified.

Application Areas:

Lithium-ion battery cathode for high-voltage 4.3 V applications
Single-crystal high-nickel NCM cathode research targeting improved cycle life
Coin-cell, pouch-cell, and prismatic-cell laboratory cell development
High-energy-density pouch cell prototyping
Cathode-slurry coating research with single-crystal high-nickel NCM
Materials science research on single-crystal versus polycrystalline high-nickel NCM

Recommended Handling:

Single-crystal Ni83 NCM should be handled in a dry environment (relative humidity preferably below 30%, dew point below −40°C recommended) to minimize moisture pickup and surface Li-residue increase. Store in a sealed container in a cool, dry place away from acidic vapors and reducing atmospheres. For slurry preparation, use NMP solvent with PVDF binder (e.g., Solef-class) and follow standard cathode-slurry formulation protocols (active material + conductive carbon + binder). Coat onto aluminum current collector using a film coater (e.g., XN-VC-300, XN-VCH-300, XN-SDC) followed by drying and calendering (e.g., XN-CRPE or XN-HRPE roller press series). High-nickel cathodes are more moisture-sensitive than medium-nickel NCM — open inner moisture-barrier packaging only inside a controlled-atmosphere environment whenever possible.

Packaging & Storage:

Standard packaging is in vacuum-sealed moisture-barrier aluminum-laminated bags inside lined drums. Store in a cool, dry environment away from heat sources, direct sunlight, acidic vapors, and reducing atmospheres. Once opened, reseal the inner moisture-barrier bag promptly and store in a dry box or dry room. Prolonged exposure to ambient humidity increases surface LiOH and Li₂CO₃ content and can degrade slurry rheology and electrochemical performance.

Safety:

For research and industrial use only. Wear appropriate PPE (chemical-resistant gloves, safety glasses, lab coat, N95 or equivalent dust respirator) when handling M2-S powder, especially during weighing, transfer, and slurry preparation. Avoid generating dust; transfer powders in a fume hood, glovebox, or with local exhaust ventilation. Avoid contact with skin and eyes; in case of contact, flush with water and seek medical attention. M2-S contains nickel, cobalt, and manganese, which are regulated heavy metals — handle and dispose of in accordance with local environmental and occupational health regulations. High-nickel NCM materials have reduced thermal stability compared with medium-nickel NCM and may decompose with oxygen release under high-temperature or over-voltage abuse — avoid prolonged exposure to elevated temperatures and do not over-charge cells beyond the rated upper limit. Refer to the included Safety Data Sheet (SDS) for complete safety information.

Note: Specifications listed above are typical and for reference only. Actual electrochemical performance depends on the specific cell architecture, electrolyte formulation, binder/conductive-additive composition, coating thickness, calendering parameters, formation protocol, and testing conditions — consult published literature and our technical team for guidance on specific single-crystal Ni83 NCM electrode protocols. The BTR M2-S is a single-crystal high-nickel NCM cathode material suitable for laboratory and small-batch cell development targeting high energy density and extended cycle life. For complete lithium-ion battery electrode preparation workflows, see also Xnergy’s related products in the Cathode Materials category, Anode Materials category, Binders category, and Current Collectors category. For electrode-coating equipment, see the Coating equipment category including Automatic Film Coater XN-VC-300, XN-VCH-300, and Slot-Die Coating System XN-SDC. For electrode calendering, see the Calendering equipment category. For mixing and drying, see Planetary Vacuum Mixer and Three-Door Vacuum Drying Oven (XN-DVO-3). For other NCM ternary cathodes, see also Xnergy’s Single-Crystal NCM523 Cathode, NCM613 Cathode, NCM Ternary Cathode (ZH6200), and High-Nickel NCM9000 Cathode.