Hunan Yuneng YN13 LFP Cathode Material

Name: Hunan Yuneng YN13 LFP Cathode Material

Material Type: Carbon-Coated Lithium Iron Phosphate (LiFePO₄)

Product Code: YN13

Brand: Hunan Yuneng (Hunan Yuneng New Energy Battery Material Ltd.)

Product Introduction:

Hunan Yuneng YN13 is a carbon-coated lithium iron phosphate (LFP, LiFePO₄) cathode active material with a sub-micron particle size (D50 ≈ 1.113 μm), a specific surface area of 12.31 m²/g, and a powder compaction density of 2.63 g/cm³. YN13 delivers 160.5 mAh/g discharge capacity at 0.1C with 98.89% first-cycle efficiency in CR2430 coin-cell testing, and is supplied as a uniform powder for lithium-ion battery electrode manufacturing.

Key Features:

Carbon-coated LFP (LiFePO₄) cathode active material
Sub-micron particle size — D10 0.429 μm, D50 1.113 μm, D90 2.81 μm, D99 4.67 μm
Specific surface area (BET) 12.31 m²/g
Carbon content 1.144%
Powder compaction density 2.63 g/cm³
0.1C discharge capacity 160.5 mAh/g, first-cycle efficiency 98.89%
Low magnetic substance content 0.15 ppm
Low moisture content 241.5 ppm
Very low trace-metal impurities (Cu 0.1 ppm, Ni 0.7 ppm, Cr 1.0 ppm, Zn 17 ppm)

Particle Size Distribution (PSD):

Measured with Malvern Mastersizer 3000 laser particle size analyzer.

Physical & Chemical Properties:

Chemical Composition:

Electrochemical Performance (CR2430 Coin Cell, 0.1C):

Values measured by Xnergy. Typical values for reference; not guaranteed unless otherwise specified.

Note: Specifications listed above are typical and for reference only. Actual electrochemical performance depends on the specific cell architecture, electrolyte formulation, binder/conductive-additive composition, coating thickness, calendering parameters, formation protocol, and testing conditions. Hunan Yuneng YN13 is supplied by Xnergy in our Cathode Materials category. For complete lithium-ion battery electrode preparation workflows, see also Xnergy’s related products in the Anode Materials category, Binders category, and Current Collectors category. For electrode-coating equipment, see the Coating equipment category including Automatic Film Coater XN-VC-300, XN-VCH-300, and Slot-Die Coating System XN-SDC. For electrode calendering, see the Calendering equipment category. For mixing and drying, see Planetary Vacuum Mixer and Three-Door Vacuum Drying Oven (XN-DVO-3). See also Xnergy’s other Hunan Yuneng LFP products: Hunan Yuneng CN-5B LFP Cathode Material and Hunan Yuneng Y9E LFP Cathode Material, and Dynanonic LFP products DY12 and DY17.