NCM, Lithium Nickel Cobalt Manganese Oxide 1kg

NCM, Lithium Nickel Cobalt Manganese Oxide 1kg

SKU: NCM

Free Shipping$682.00

NCM Lithium Nickel Cobalt Manganese Oxide Cathode Material — high-nickel NCM with Ni 49.1%, Co 7.1%, Mn 2.8% (wt%), D50 10.00 ± 2.00 μm, tap density 2.750 ± 0.300 g/cm³, BET 0.700 ± 0.200 m²/g.

1st discharge ≥ 208.0 mAh/g at 0.1C, 3.0–4.3 V with ≥ 89.00% first-cycle efficiency.

Need a bulk order? Request a competitive quote today!

Name: NCM Lithium Nickel Cobalt Manganese Oxide Cathode Material

Material Type: High-Nickel Lithium Nickel Cobalt Manganese Oxide (Ni 49.1%, Co 7.1%, Mn 2.8%)

Product Code: NCM

Product Introduction:

This high-nickel lithium nickel cobalt manganese oxide (NCM) cathode material features low impedance growth during cycling. The material is produced using a continuous precursor synthesis with optimized Li/Me ratio, a specialized doping process, and advanced processing equipment. The properly proportioned composition delivers high discharge capacity, low initial resistance, and stable cycling performance with suppressed impedance growth.

Key Features:

High-nickel NCM chemistry — Ni 49.1 wt%, Co 7.1 wt%, Mn 2.8 wt% (total metals Ni+Co+Mn 59.00 ± 1.00 wt%)
1st discharge capacity ≥ 208.0 mAh/g at 0.1C/0.1C, 3.0–4.3 V (CR2032 coin cell)
1st Coulombic efficiency ≥ 89.00%
D50 particle size 10.00 ± 2.00 μm, D10 ≥ 4.00 μm
High tap density 2.750 ± 0.300 g/cm³
Specific surface area 0.700 ± 0.200 m²/g
Low surface lithium residues — Li₂CO₃ ≤ 0.3000 wt%, LiOH ≤ 0.5000 wt%
Low moisture ≤ 400 ppm

Chemical Composition:

Element / Component Unit Specification Typical
Ni + Co + Mn (total metals) wt% 59.00 ± 1.00 59.02
Ni wt% 49.10 ± 1.00 49.14
Co wt% 7.10 ± 0.50 7.10
Mn wt% 2.80 ± 0.50 2.81

Surface Lithium Residues & Moisture:

Item Unit Specification Typical
Li₂CO₃ wt% ≤ 0.3000 0.2230
LiOH wt% ≤ 0.5000 0.4140
Moisture (H₂O) ppm ≤ 400 274
pH — ≤ 12.00 11.78

Impurities:

Item Unit Specification Typical
Fe ppm ≤ 100.0 31.0
Na ppm ≤ 150.0 41.0
Cu ppm ≤ 20.0 1.0

Particle Size Distribution (PSD):

Parameter Unit Specification Typical
D10 μm ≥ 4.00 5.17
D50 μm 10.00 ± 2.00 9.70
D90 μm ≤ 22.00 17.10
D99 μm ≤ 28.00 23.80

Physical Properties:

Property Unit Specification Typical
Tap Density g/cm³ 2.750 ± 0.300 2.750
Specific Surface Area (BET) m²/g 0.700 ± 0.200 0.682

Electrochemical Performance (Coin Cell, 0.1C/0.1C, 3.0–4.3 V, CR2032):

Parameter Unit Specification Typical
1st Discharge Capacity mAh/g ≥ 208.0 211.4
1st Coulombic Efficiency % ≥ 89.00 91.6

Values measured in CR2032 coin cell at 0.1C/0.1C, 3.0–4.3 V. Typical values for reference; not guaranteed unless otherwise specified.

Storage:

Store at room temperature in a dry environment. The material is hygroscopic — maintain low ambient humidity during opening and use, and consume promptly after opening.

Note: Specifications listed above are typical and for reference only. Actual electrochemical performance depends on the specific cell architecture, electrolyte formulation, binder/conductive-additive composition, coating thickness, calendering parameters, formation protocol, and testing conditions. For complete battery electrode preparation workflows, see also Xnergy’s related products in the Cathode Material Powder category, Anode Materials category, Binders category, and Current Collectors category. For electrode-coating equipment, see the Coating equipment category. For electrode calendering, see the Calendering equipment category.

Related products