LCO (LiCoO₂) Cathode Sheet on Aluminum Foil for Lithium-Ion Batteries (Single / Double-Sided Coating)

SKU: XN-LCO-ES

Free Shipping Price range: $180.00 through $228.00

LCO (LiCoO₂) Cathode Sheet on Aluminum Foil (Single / Double-Sided) — LCO on 16 μm Al foil, 241 × 200 mm; single-sided 11.5 ± 0.2 mg/cm², double-sided 22.8 ± 0.4 mg/cm²; AM content 96%; voltage range 3.0–4.5 V.

Reference capacity 180 mAh/g at 0.1C (single-sided). Multiple coating options available.

Need a bulk order? Request a competitive quote today!

Name: LCO (LiCoO₂) Cathode Sheet on Aluminum Foil (Single / Double-Sided Coating)

Material Type: LCO Lithium Cobalt Oxide on 16 μm Aluminum Foil

Product Code: XN-LCO-ES

Product Introduction:

LCO (LiCoO₂) is the classical lithium cobalt oxide cathode material widely used in commercial lithium-ion batteries and laboratory research. This electrode sheet is coated on 16 μm aluminum foil and available in single-sided (11.5 ± 0.2 mg/cm²) and double-sided (22.8 ± 0.4 mg/cm²) configurations over a 3.0–4.5 V voltage window. Reference specific capacity is 180 mAh/g at 0.1C (single-sided). Active material mass ratio is 96%. Sheet size is 241 mm × 200 mm. Supplied 5 sheets/pack.

Key Features:

LCO (LiCoO₂) — classical cobalt-based cathode, voltage range 3.0–4.5 V
Reference specific capacity 180 mAh/g at 0.1C (single-sided)
Available in single-sided (11.5 ± 0.2 mg/cm²) and double-sided (22.8 ± 0.4 mg/cm²) coating
Compacted density: 3.5 ± 0.1 g/cm³ (single-sided) / 4.0 ± 0.1 g/cm³ (double-sided)
Current collector: 16 μm aluminum foil, 4.22 mg/cm²
Active material mass ratio 96%
Total thickness 50–70 μm (single-sided)
Electrode size: 241 × 200 mm (coating area 241 × 175 mm)
Packaging: 5 sheets/pack

Single-Sided Coating Specifications:

Parameter Specification
Electrode Sheet Size 241 mm (L) × 200 mm (W)
Coating Area Size 241 mm (L) × 175 mm (W) (12.5 mm uncoated edge on each side)
Coating Type Single-sided coating (calendered)
Total Thickness (μm) 50–70
Current Collector Thickness (μm) 16
Coating Areal Density (mg/cm²) 11.5 ± 0.2
Current Collector Areal Density (mg/cm²) 4.22
Active Material Mass Ratio 96%
Compaction Density (g/cm³) 3.5 ± 0.1
Voltage Range 3.0–4.5 V
Reference Specific Capacity 180 mAh/g (0.1C)

Double-Sided Coating Specifications:

Parameter Specification
Electrode Sheet Size 241 mm (L) × 200 mm (W)
Coating Area Size 241 mm (L) × 175 mm (W) (12.5 mm uncoated edge on each side)
Coating Type Double-sided coating
Substrate Thickness (μm) 16
Coating Areal Density (mg/cm²) 22.8 ± 0.4
Foil Areal Density (mg/cm²) 4.22
Compaction Density (g/cm³) 4.0 ± 0.1
Active Material Mass Ratio 96%
Reference Specific Capacity 160 mAh/g
Reference Voltage Range 3.0–4.5 V

Notes:

  1. The active material mass ratio is subject to actual measurement. The above parameters are for reference only.
  2. After opening, please seal and store properly. It can be kept in a glove box or in an oven at 60°C.

Storage & Handling:

Store sealed in a cool, dry, low-humidity environment. After opening, reseal immediately and store in a glove box or in a drying oven at 60°C. Handle by the edges to avoid contaminating the active coating.

Note: Specifications are for reference only. Actual electrochemical performance depends on counter/reference electrode selection, electrolyte, separator, cell assembly conditions, and cycling protocol. For anode electrode sheets, see the Anode Materials category. For electrolytes, see the Electrolytes category. For coin cell assembly components, see Coin Cells & Hardware.

ESD Specifications

Double-Side Coating, Single-Side Coating