Precision Coin Cell Disc Cutter XN-CP60
SKU: XN-CP60
Need a bulk order? Request a competitive quote today!
Precision Coin Cell Disc Cutter XN-CP60
Equipment Type: Compact Manual Disc Cutter for Coin Cell Electrodes & Separators
Product Code: XN-CP60
Brand: Xnergy
Product Introduction
XN-CP60 is a compact, manually operated disc cutter built for precision cutting of coin cell electrodes, separator films, and other thin battery materials. A precision linear-slide guide drives the upper punch into the lower die, delivering clean discs with no burr, no indentation, and no powder drop across the 0.005–0.5 mm thickness range. The aluminum-alloy body is corrosion-resistant, the footprint is small enough to enter a glovebox through a Φ200 mm antechamber, and die sizes from 3 to 24 mm are available to order. XN-CP60 is the standard table-top disc cutter for coin cell research labs requiring clean, consistent electrode discs without pneumatic or electrical infrastructure.
Key Features
• Precision linear-slide guide — upper punch travels with zero lateral play; discs are burr-free with no indentation or impression
• Wide material range (0.005–0.5 mm) — cuts cathode foil, anode foil, separator film, current collector, and lithium metal
• Glovebox-compatible — passes through Φ200 mm antechamber; no power or gas line required
• Corrosion-resistant aluminum-alloy body — rust-proof and easy to clean in dry-room and inert-atmosphere environments
• Die sizes 3–24 mm — specify at order; optional additional dies available for multi-size workflows
• No power required — fully mechanical hand operation
Specification
| Parameter | Specification |
|---|---|
| Operation | Manual (hand-lever), no power required |
| Punch Diameter | Φ3 – Φ24 mm (customer-specified die) |
| Max. Stroke Length | 25 mm |
| Material Thickness Range | 0.005 – 0.5 mm (5 μm – 500 μm) |
| Glovebox Compatibility | Passes through Φ200 mm antechamber |
| Dimensions | 110 mm (L) × 160 mm (W) × 260 mm (H) |
| Body Material | Aluminum alloy (corrosion-resistant) |
| Warranty | 1 year limited; lifetime technical support |
Application Areas
• Coin cell electrode disc cutting: CR2016 (Φ16 mm anode, Φ19 mm cathode, Φ20 mm separator), CR2025, CR2032, CR2450
• Separator disc preparation (larger than electrode to prevent short circuit)
• Lithium metal anode disc cutting inside Ar-atmosphere glovebox
• TEM thin-film sample disc preparation
• Thin current collector foil (Al, Cu) disc cutting for half-cell and full-cell research
• General thin-film material sampling for characterization
Related Products
• Hand-Held Electrode Disc Cutter XN-HHDC
• Manual Electrode Disc Punching Machine XN-HPM-24
• Pneumatic Electrode Die-Cutting Machine XN-PDC-120
• Browse the full Slitting & Die Cutting category.
