LCO (LiCoO₂) Cathode Sheet on Aluminum Foil for Lithium-Ion Batteries (Multiple Specs)

Name: LCO (LiCoO₂) Cathode Electrode Sheet

Material Type: LCO Lithium Cobalt Oxide on Carbon-Coated Aluminum Foil

Product Code: XN-LCO-CC-ES

Product Introduction:

LCO (LiCoO₂) is the classical lithium cobalt oxide cathode material widely used in commercial lithium-ion batteries and laboratory research. This electrode sheet features LCO active material coated on carbon-coated aluminum foil with a reference specific capacity of 190 mAh/g. Active material loading options of 2, 3, or 5 mg/cm² are available with active material content of 80% or 90%. Multiple specifications are available and customization is supported upon request.

Key Features:

LCO (LiCoO₂) active material — classical cobalt-based cathode for research
Reference specific capacity 190 mAh/g
Current collector: carbon-coated aluminum foil, 1 + 15 + 1 μm, 4.14 mg/cm²
Active material loading: 2 / 3 / 5 mg/cm² (other loadings available on request)
Active material content: 80% or 90%
Electrode size: 7 × 7 cm (customization supported)
Multiple specifications available — customization supported

Main Specifications:

Notes:

Active material loading is calculated as: (weight of punched electrode − weight of current collector) × active material content %.

Storage & Handling:

Store sealed in a cool, dry, low-humidity environment. After opening, reseal immediately and store in a glove box or in a drying oven at 60°C. Handle by the edges to avoid contaminating the active coating.

Note: Specifications are for reference only. Actual electrochemical performance depends on counter/reference electrode selection, electrolyte, separator, cell assembly conditions, and cycling protocol. For anode electrode sheets, see the Anode Materials category. For electrolytes, see the Electrolytes category. For coin cell assembly components, see Coin Cells & Hardware.