Electric Electrode Slitter XN-CSE-300

Name: Electric Electrode Slitter XN-CSE-300

Equipment Type: Compact Benchtop Electric Electrode Slitter

Product Code: XN-CSE-300

Brand: Xnergy

Product Introduction:

Electric Electrode Slitter XN-CSE-300 is a compact benchtop motorized slitting unit for cutting coated lithium-ion battery cathode and anode electrode strip into narrow strips. Upper-and-lower circular blades — combining steel blades and rubber blades at configurable spacing — deliver synchronous rolling-cut action driven by a gear-and-reducer transmission. An adjustable guide bar handles infeed positioning, and an acrylic blade guard protects the operator. The open-frame blade mounting allows quick blade removal for cleaning and replacement.

Key Features:

Compact benchtop footprint (76 kg) suitable for R&D and small-batch slitting
Adjustable guide bar for infeed positioning
Motorized rolling-cut slitting via gear and reducer transmission
Upper and lower blades run synchronously at the same speed
Blade engagement (cutting depth) adjustable 0.2 – 0.4 mm via handwheel
Open-frame blade mount for quick blade removal and cleaning
Acrylic blade guard for operator safety
Knob-adjustable speed control up to 5 m/min
Configurable blade spacer set — 56 / 56 / 58 / 58 mm standard, other spacings available

Technical Specifications:

Application Areas:

XN-CSE-300 is suitable for:

Slitting coated lithium-ion battery cathode and anode electrode strip into narrow strips
R&D and small-batch electrode preparation
Workflows where motorized slitting at moderate speed is sufficient and a full roll-to-roll machine is not required

Maintenance:

Clean the blades and equipment regularly with a soft cloth lightly moistened with alcohol
Lubricate moving parts periodically to ensure smooth operation
If the equipment is not used for an extended period, wipe the blade surfaces clean and apply a protective anti-rust coating
Periodically inspect screws, nuts, pins, and other fasteners to prevent loosening

Safety Notes:

Do not place hands or other body parts in the blade work area during operation
Operation should be performed by a single trained operator to avoid accidental injury
Disassembly should only be performed by qualified technicians

Specifications are provided for reference and may be adjusted to suit specific process requirements. Custom blade spacings are available on request.

Note: Specifications listed above are typical and for reference only. Actual slitting performance depends on the electrode strip thickness, coating uniformity, blade condition, and operating parameters. XN-CSE-300 is positioned as the entry-level motorized slitter in Xnergy’s slitting line — a benchtop unit at 76 kg with knob-adjustable speed and handwheel-adjustable blade engagement, sized for laboratories and small-batch users who need motorized slitting without the cost and floor-space of a full roll-to-roll system. For pilot- and production-scale workflows that require unwind alignment, servo-tensioned slip-shaft rewinding, ±0.09 mm precision, and PLC + HMI control, step up to the Roll-to-Roll Continuous Slitter XN-CSER-500. When the requirement is single-sheet rather than narrow-strip output — for coin-cell or pouch-cell electrode preparation — the Automatic Electrode Sheet Cutter XN-ARSC-300 performs roll-to-sheet cutting with fiber-tracked registration. For electrode strip ready for slitting, see our Cathode Materials and Anode Materials ranges for upstream materials, and the Slot-Die Coating System XN-SDC for coated electrode production.