0.4L Planetary Ball Mill Machine Laboratory Ball Grinding 4x100ml

Product Description

Beautiful appearance, easy handling, fine grinding particle size, a good helper in the laboratory.
It is used in colleges and universities, scientific research units and enterprise laboratories to quickly grind research samples to colloidal fineness in batches, and then mix, homogenize and disperse. Widely used in geological, mining, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, beauty, environmental protection and other scientific research and industrial sectors.

Control Panel

The panel has adjustment speed, grinding plan, start and stop emergency stop function, which can be adjusted according to your experimental requirements.

Fine Grinding

Complete grinding methods, including dry grinding, wet grinding, high temperature grinding, low temperature grinding, vacuum grinding, protective atmosphere grinding, and the discharge particle size can reach 0.1 um.

Safety Device

In order to avoid emergencies during the experiment, open the lid and make an emergency stop. The instrument will stop running immediately.
Frequency Conversion Control System
The main functions of the Xnergy planetary ball mill frequency conversion control system are as follows:
1. Forward operation: The planetary disk rotates clockwise.
2. Reverse rotation: The planetary disk rotates counterclockwise.
3. Alternate forward and reverse operation: The planetary disk rotates clockwise and counterclockwise alternately; the alternating forward and reverse operation can improve the uniform mixing and grinding effect of materials.
4. Forward and reverse alternate running time setting: You can set the forward running time and reverse running time.
5. Intermittent operation: The combined grinding method of static and grinding, this grinding method can properly precipitate and cool the material, which is very practical.
6. Intermittent running time setting: Set the static time and running time, which can be determined according to the nature of the material or experience.
7. Speed ​​adjustment: Adjustment of running speed, stepless speed regulation.
8. Running time setting: The setting of the total running time, the maximum duration is 9999 minutes, and the recommended duration is less than or equal to 100 hours.
9. Running: When running, the device works according to the set program.
10. Pause: Stop when running.
11. Power failure memory point recovery: This function is a special function of Miqi planetary ball mill, accidental power failure recovery memory, starting grinding from the power failure point.
12. Safety switch: On/off of the flip safety switch, after setting, it will not affect the normal operation of the device when the flip is opened or closed.
13. Restore settings: Can restore factory settings.
After the control system program is set, the set function will be retained, and the next time it is turned on, it will run according to the last running program.

Technical Details

Name	Planetary ball mill
Model	XNQM-0.4L(Oil seal mute）
Field of Application	Pharmaceuticals, food, geology, metallurgy, agriculture, glass, ceramics, aviation chemicals, biology, materials, lithium power, electronics, plants, biology and so on.
Feed Material	Medium or low hardness, hard, brittle, fibrous, viscous.
Size Reduction Principle	Impact, friction
Application	pulverizing, grinding, mixing homogenizing,mechanical alloying
Main Disk Structure	Planetary main disk gear invades and reinforces in lubricating oil, noise isolation treatment
Standard	CE
Electrical Description	110V/200-240V AC ,50-60Hz, (0.55KW)
Material Feed Size	< 5 mm  soil<10 mm
Final Fineness	< 100 nm
Batch Size / Feed Quantity	4 x 100 ml
Grinding Jar Sizes	50 ml /100 ml
Vacuum Jar Size	50 ml /100ml( Stainless steel)
Feed Material Capacity	33ml*4
Feed balls Capacity	33 ml*4
Sun Wheel Speed	10 – 450 r/min
Ball Mill Jar Speed	20 – 900 r/min
Total Grinding Speed	1350 /min
Speed Ratio	1:2
Material of Grinding Tools	Stainless steel, agate, zirconia, corundum, tungsten carbide, nylon, polyurethane, polytetrafluoroethylene, silicon carbide, etc.
Ball Size	1 / 2 / 3 / 5 / 8 / 10 / 15 / 20 / 25 / 30 mm
No. of Grinding Stations	2 or 4