Sodium (Na) Chip, 15.6 mm Diameter × 0.45 mm Thickness, for Sodium-Ion Batteries, 200 pcs/Bottle – SIB-NaC05
Need a bulk order? Request a competitive quote today!
Sodium (Na) Chip, 15.6 mm Diameter × 0.45 mm Thickness, for Sodium-Ion Batteries, 200 pcs/Bottle – SIB-NaC05
| Specifications | Details |
|---|---|
| Material | Sodium metal composite supported by aluminum to improve mechanical strength. |
| Diameter | 15.6 mm |
| Thickness | 0.45 mm |
| Protective Layers | The aluminum side is protected with a blue film, while the sodium side is covered with a transparent protective film. |
| Packaging | A four-layer packaging method is used for safe storage and handling. One side of the sodium sheet is laminated with aluminum foil, which provides mechanical support, functions as a current collector, and helps protect the sodium surface. Both sides are additionally covered with protective films against oxidation. The sodium sheets are packed in plastic bottles, then sealed in aluminum-plastic bags, and finally enclosed in iron cans for enhanced long-term storage safety. |
| Handling Instructions | • Open the package only inside an argon-filled glove box with moisture below 2% RH.• Remove the aluminum bag and take out the entire plastic bottle. After removing the required quantity of sodium chips, close the bottle cap tightly right away.• Hold the sodium chip using flat-tip tweezers, then peel off the protective films with a sharp tweezer. Remove the blue film and transparent film in order.• During cell assembly, the aluminum side should face the cell case, while the sodium metal side should face the separator. |
