Dynanonic DY-X1 LFP Cathode Material

Name: Dynanonic DY-X1 LFP Cathode Material

Material Type: High-Compaction Lithium Iron Phosphate (LFP)

Product Code: DY-X1

Brand: Dynanonic

Product Introduction:

Dynanonic DY-X1 is a high-compaction lithium iron phosphate (LFP) cathode active material with a powder compaction density of 2.65 g/cm³ and a 1C coin-cell discharge capacity of 142 mAh/g. It offers excellent cycle performance — over 99% capacity retention after 300 cycles at 1C/1C at room temperature — and excellent rate performance, with 5C discharge capacity retention above 97%. DY-X1 features high specific energy and low resistance, and is suitable for power-battery and energy-storage applications.

Key Features:

High-compaction LFP product — powder compaction density 2.65 g/cm³, 1C coin-cell capacity 142 mAh/g
Excellent cycle performance — capacity retention above 99% after 300 cycles at 1C/1C at room temperature
Excellent rate performance — 5C discharge capacity retention above 97%
Suitable for power and energy-storage applications, with high specific energy and low resistance

Key Performance:

SEM Morphology:

SEM imaging shows that DY-X1 consists of near-spherical primary particles with a uniform morphology, consistent with its high-compaction product design.

Application Areas:

DY-X1 is suitable for:

Power batteries
Energy storage systems

Values measured by Xnergy. Typical values for reference; not guaranteed unless otherwise specified.

Note: Specifications listed above are typical and for reference only. Actual electrochemical performance depends on the specific cell architecture, electrolyte formulation, binder/conductive-additive composition, coating thickness, calendering parameters, formation protocol, and testing conditions. Dynanonic DY-X1 is supplied by Xnergy in our Cathode Materials category. For complete lithium-ion battery electrode preparation workflows, see also Xnergy’s related products in the Anode Materials category, Binders category, and Current Collectors category. For electrode-coating equipment, see the Coating equipment category including Automatic Film Coater XN-VC-300, XN-VCH-300, and Slot-Die Coating System XN-SDC. For electrode calendering, see the Calendering equipment category. For mixing and drying, see Planetary Vacuum Mixer and Three-Door Vacuum Drying Oven (XN-DVO-3). See also Xnergy’s other Dynanonic LFP products: Dynanonic DY12 LFP Cathode Material and Dynanonic DY17 LFP Cathode Material, and Hunan Yuneng LFP products CN-5B, Y9E, and YN13.