Ronbay S76L Single-Crystal NCM622 Cathode Material

Name: Ronbay S76L Single-Crystal NCM622 Cathode Material

Material Type: High-Compaction Single-Crystal Lithium Nickel Cobalt Manganese Oxide (NCM622)

Product Code: S76L

Brand: Ronbay (Ningbo Ronbay New Energy Technology Co., Ltd.)

Product Introduction:

Ronbay S76L is a high-compaction single-crystal nickel cobalt manganese oxide (NCM622) cathode active material with a D50 of 5.01 μm, a high tap density of 1.97 g/cm³, and a specific surface area of 0.62 m²/g. S76L delivers a specific capacity of 176.3 mAh/g with 89.1% first-cycle efficiency in coin half-cell testing (4.30–3.0 V vs Li⁺/Li, 0.1C, 25°C), and is suitable for steel-can, aluminum-can, and pouch lithium-ion cell formats.

Key Features:

High-compaction single-crystal NCM622 cathode active material
Spherical or quasi-spherical single-crystal particle morphology
Particle size distribution — D10 2.79 μm, D50 5.01 μm, D90 9.99 μm
High tap density 1.97 g/cm³
Low specific surface area 0.62 m²/g
Low moisture content 183 ppm
0.1C specific capacity 176.3 mAh/g, first-cycle efficiency 89.1% (4.30–3.0 V vs Li⁺/Li, 25°C, coin half-cell)
Low magnetic impurity content (Fe+Cr+Zn) 29 ppb
Low trace-metal impurities (Fe 12 ppm, Cu 1 ppm)
Clean XRD pattern with no secondary phases
RoHS-compliant (EU standard)

Particle Size Distribution (PSD):

Measured with Malvern Mastersizer 2000 laser particle size analyzer (Hydro 2000MU(A) sampler).

Physical Properties:

Chemical Composition:

SEM Morphology:

SEM imaging shows that S76L consists of single-crystal primary particles with clear faceted crystal surfaces and a uniform spherical to quasi-spherical morphology, consistent with the particle size distribution.

SEM, low magnification (×1,000, 50 μm scale bar).

SEM, high magnification (×2,000, 20 μm scale bar). Imaging with Hitachi SU8000 SEM.

XRD Pattern:

The XRD pattern shows a clean layered NCM structure with well-defined (003), (101), and (104) characteristic peaks and no secondary phases.

Electrochemical Performance (Coin Half-Cell, 4.30–3.0 V vs Li⁺/Li, 0.1C, 25°C):

Packaging & Storage:

S76L is packaged in aluminum-foil-laminated vacuum bags inside plastic drums or cartons, with a net weight of 20.00 kg ± 0.02 kg per drum. Alternative packaging such as ton bags or cartons can be arranged by agreement. When sealed under vacuum and stored in a cool, dry place, the shelf life is one year.

Handling Notes:

Avoid impact and inversion during transport
Store in a clean, ambient, cool and dry environment
Protect from direct sunlight, heat, and rain during transport
Use immediately after opening; if not used immediately, reseal to prevent moisture absorption

Values measured by Xnergy. Typical values for reference; not guaranteed unless otherwise specified.

Note: Specifications listed above are typical and for reference only. Actual electrochemical performance depends on the specific cell architecture, electrolyte formulation, binder/conductive-additive composition, coating thickness, calendering parameters, formation protocol, and testing conditions. Ronbay S76L is supplied by Xnergy in our Cathode Materials category. For complete lithium-ion battery electrode preparation workflows, see also Xnergy’s related products in the Anode Materials category, Binders category, and Current Collectors category. For electrode-coating equipment, see the Coating equipment category including Automatic Film Coater XN-VC-300, XN-VCH-300, and Slot-Die Coating System XN-SDC. For electrode calendering, see the Calendering equipment category. For mixing and drying, see Planetary Vacuum Mixer and Three-Door Vacuum Drying Oven (XN-DVO-3). See also Xnergy’s other Ronbay single-crystal NCM products: Ronbay S740B Single-Crystal NCM, Ronbay SC60 Single-Crystal NCM, Ronbay SC92Y Single-Crystal Ni91 NCM, and Ronbay S8303 Single-Crystal NCM811.