Manual Powder Tablet Press XN-MC Series
SKU: XN-MC
Manual Powder Tablet Press XN-MC Series is a hydraulic, lever-operated press for compacting powder samples into tablets or pellets. Its mechanical lever principle is matched with molds of various sizes, making it practical and convenient for laboratory sample preparation.
It features a dual-scale pressure gauge and stable, leak-free performance after long-term use, with models spanning 5 T to 40 T of pressing force.
Need a bulk order or custom specification? Request a competitive quote today!
Name: Manual Powder Tablet Press XN-MC Series
Equipment Type: Manual Powder Laboratory Tablet Press (Hydraulic)
Product Code: XN-MC
Brand: Xnergy
Product Introduction:
The XN-MC Manual Powder Tablet Press is a hydraulic, lever-operated press for compacting powder samples into tablets or pellets. Tablet presses of this kind are mainly used for pressing sample tablets within a diameter range of about 3–150 mm. The mechanical lever principle is matched with molds of various sizes, making the press both practical and convenient. It does not leak oil after long-term use and delivers stable performance. The series spans pressing forces from 5 T to 40 T.
Key Features:
Hydraulic, lever-operated pressing based on a mechanical lever principle
Matched with molds of various sizes for different tablet and pellet diameters
Dual-scale pressure gauge for clear reading
Good pressure stability — ≤ 1 MPa / 10 min
No oil leakage after long-term use, with stable performance
Practical and convenient operation
Technical Specifications:
| Parameter | XN-MC-5 | XN-MC-12 | XN-MC-15 | XN-MC-24 | XN-MC-30 | XN-MC-40 |
|---|---|---|---|---|---|---|
| Pressure Range (T) | 0–5 | 0–12 | 0–15 | 0–24 | 0–30 | 0–40 |
| Piston Diameter | Φ45 mm | Φ70 mm | Φ80 mm | Φ95 mm | Φ110 mm | Φ130 mm |
| Pressure Gauge | Dual-scale display, 30 mm dial | |||||
| Pressure Stability | ≤ 1 MPa / 10 min | |||||
| Workbench Diameter | Φ80 mm | Φ80 mm | Φ90 mm | Φ105 mm | Φ120 mm | Φ140 mm |
| Number of Columns | 2 | 2 | 2 / 4 | 4 | 4 | 4 |
| Dimensions | 210 × 150 × 350 mm | 225 × 155 × 380 mm | 245 × 175 × 390 mm | 245 × 175 × 415 mm | 275 × 195 × 420 mm | 295 × 215 × 500 mm |
| Weight | 20 kg | 28 kg | 38 / 40 kg | 42 kg | 56 kg | 75 kg |
| Column Spacing | 85 × 120 mm | 96 × 130 mm | 140 × 150 / 80 × 130 mm | 80 × 150 mm | 92 × 160 mm | 106 × 185 mm |
| Mold Diameter | 3–14 mm | 3–25 mm | 3–40 / 3–25 mm | 3–40 mm | 3–50 mm | 3–60 mm |
Application Areas:
Pressing powder samples into tablets or pellets
Sample preparation for XRD, XRF, IR, and other analyses
Battery R&D — pressing electrode discs and solid-electrolyte pellets
Laboratory and small-scale material compaction
Pelletizing across a range of mold sizes
Maintenance:
Keep the molds and ram clean and lightly lubricated
Check the hydraulic oil level and top up as needed
Inspect the pressure gauge and release valve before use
Store molds clean and dry to prevent rust
Safety Notes:
Do not exceed the rated pressure range for the model and mold
Keep hands clear of the ram and mold during pressing
Release pressure slowly via the valve after pressing
Use the correct mold for the sample diameter and force
Specifications are provided for reference and may be adjusted to suit specific process requirements. Model and mold size are specified at order time.
Note: Specifications listed above are typical and for reference only. Actual performance depends on the sample and mold. The XN-MC Manual Powder Tablet Press uses a hydraulic, lever-driven mechanism to compact powder samples into tablets or pellets, matched with molds of various sizes and offering a dual-scale gauge and stable, leak-free performance from 5 T to 40 T. It is widely used for sample preparation — pressing pellets for XRD, XRF, and IR analysis and, in battery R&D, compacting electrode discs and solid-electrolyte pellets from Cathode Materials and Anode Materials. Samples are typically ground first on equipment such as the XN-MT-120 Agate Mortar Grinder or the planetary XN-YXQM Series before pressing.
