Rotary Vane Vacuum Pump XN-MZT Series
SKU: XN-MZT
Rotary Vane Vacuum Pump XN-MZT Series uses an eccentric rotor with spring-loaded sliding vanes to draw and compress gas, producing a stable working vacuum for laboratory and glove-box duties.
The oil-sealed series offers pumping rates from 2 to 8 L/s with motor powers of 0.37 to 1.5 kW, in compact units with an integral oil reservoir.
Need a bulk order or custom specification? Request a competitive quote today!
Name: Rotary Vane Vacuum Pump XN-MZT Series
Equipment Type: Rotary Vane Vacuum Pump
Product Code: XN-MZT
Brand: Xnergy
Product Introduction:
The XN-MZT Rotary Vane Vacuum Pump is built around a stator, rotor, rotary vanes, stator cover, and springs. The rotor is mounted eccentrically in the stator cavity — its outer circle nearly tangent to the inner surface of the stator, with a very small gap — and two rotary vanes slide in the rotor slots, held against the stator wall by spring tension and centrifugal force. As the rotor turns, the vanes continuously sweep along the inner wall to draw and compress gas, producing the vacuum. The series offers pumping rates from 2 to 8 L/s.
Key Features:
Rotary vane design with an eccentric rotor and spring-loaded vanes
Pumping rates from 2 to 8 L/s across the series
Oil-sealed operation for a stable working vacuum
Compact, motor-driven units with an integral oil reservoir
Well suited to laboratory and glove-box evacuation duties
Technical Specifications:
| Model | Pumping Rate | Air Inlet Diameter | Oil Capacity | Dimensions | Power | Voltage | Gross / Net Weight |
|---|---|---|---|---|---|---|---|
| XN-MZT-2L | 2 L/s | φ30 mm | 0.8 L | 48 × 12 × 25 cm | 0.37 kW | Configurable according to local electrical standards | 22 / 20 kg |
| XN-MZT-4L | 4 L/s | φ30 mm | 1 L | 52 × 14 × 25 cm | 0.55 kW | Configurable according to local electrical standards | 21 / 20 kg |
| XN-MZT-6L | 6 L/s | φ40 mm | 2 L | 56 × 20 × 34 cm | 0.75 kW | Configurable according to local electrical standards | 45 / 40 kg |
| XN-MZT-8L | 8 L/s | φ40 mm | 3 L | 65.5 × 23 × 35 cm | 1.50 kW | 380 V | 58 / 52 kg |
Application Areas:
Evacuating glove boxes, vacuum ovens, and chambers
Backing pump for laboratory vacuum systems
Degassing, drying, and vacuum impregnation
Battery R&D — electrode drying and cell-related vacuum steps
General laboratory and small-scale vacuum duties
Maintenance:
Check the oil level and condition regularly; change oil per the schedule
Inspect the inlet filter and seals for wear
Keep the pump and cooling vents clean and unobstructed
Run the pump with the correct oil and inlet conditions to protect the vanes
Safety Notes:
Connect to the correct power supply and ensure proper grounding
Avoid drawing in liquids, dust, or corrosive vapors without suitable traps
Allow the motor to cool before servicing
Use appropriate exhaust handling for the pumped gases
Specifications are provided for reference and may be adjusted to suit specific process requirements. Model is specified at order time.
Note: Specifications listed above are typical and for reference only. The XN-MZT Rotary Vane Vacuum Pump provides the evacuation duty behind Xnergy’s vacuum and inert-atmosphere equipment, with pumping rates from 2 to 8 L/s. It is commonly paired with glove boxes such as the XN-CMT Purification System Glove Box, the circulating XN-JMT Glove Box, the XN-STX Stainless Steel Glove Box, and the XN-2440 Dual-Workstation Glove Box, as well as vacuum chambers and drying ovens used in battery and materials R&D.
