Hand-Held Electrode Disc Cutter XN-HHDC
SKU: XN-HHDC
Lightweight plier-style disc cutter for punching coin cell electrodes, separator films, and thin metal foils by hand. No power or air supply required — fully mechanical squeeze action. Available in circular (Ø8–50 mm), square (25×25 to 50×50 mm), and hole-punch configurations. Weight 0.6 kg; glovebox-compatible. Specify die size at order.
Hand-Held Electrode Disc Cutter XN-HHDC
Equipment Type: Hand-Held Plier-Type Electrode Disc Cutter
Product Code: XN-HHDC
Brand: Xnergy
Product Introduction
The XN-HHDC is a lightweight, plier-style hand-held disc cutter for punching precision circular or square electrodes and separators from thin metal foils and films. Its squeeze-action mechanism delivers clean, burr-free cuts in a single hand motion — no power supply, no bench setup, and no air compressor required. At just 0.6 kg, the XN-HHDC is easily used inside a glovebox, passed through an antechamber, or carried between workstations. Each unit ships with a fixed die of the customer-specified size; available diameters range from Ø8 mm to Ø50 mm circular, and square dies from 25×25 to 50×50 mm. The XN-HHDC is the go-to tool for quick coin cell electrode preparation, TEM sample disc cutting, and mass production of standard electrode discs by hand.
Key Features
• Plier-squeeze action — one-handed operation delivers a full punch stroke; no lever, crank, or press required
• Wide size selection — circular dies from Ø8 mm to Ø50 mm; square dies 25×25 to 50×50 mm; hole punches Ø8 and Ø9 mm
• Clean, burr-free cuts — hardened die ensures precise edge with no tearing, powder drop, or impression on soft foils up to 0.3 mm thick
• Glovebox-compatible — no external power or gas line; ultra-compact (0.6 kg, 24 × 9 × 7.5 cm) passes freely through standard antechambers
• No power required — fully mechanical; suitable for use in any atmosphere including Ar and N₂ glovebox environments
• Specify size at order — select your required die diameter or shape when ordering; the fixed die is pre-installed at the factory
Specification
| Parameter | Specification |
|---|---|
| Operation | Hand-held plier-type, fully manual (no power required) |
| Die Shape | Circular, Square, or Hole Punch (specify at order) |
| Circular Sizes Available | Ø8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 25, 30, 35, 35.68, 40, 44.28, 50 mm |
| Square Sizes Available | 25×25 mm, 40×40 mm, 50×50 mm |
| Hole Punch Sizes | Ø8 mm, Ø9 mm |
| Max Cutting Thickness | 0.3 mm (soft metallic foil — Al, Cu, etc.) |
| Die Interchangeability | Fixed die — one die per unit; specify size at order |
| Weight | 0.6 kg |
| Packaging Dimensions | 24 × 9 × 7.5 cm |
| Body Material | Hardened steel die, ergonomic handle grip |
Application Areas
• Coin cell electrode disc preparation: CR2016 (Ø15 mm anode / Ø19 mm cathode / Ø20 mm separator), CR2025, CR2032
• Separator disc cutting for coin cell, Swagelok, and pouch cell assemblies
• Lithium metal, sodium metal, and other moisture-sensitive anode disc preparation inside glovebox
• Aluminum and copper current collector foil disc cutting for half-cell research
• TEM thin-film sample disc preparation (Ø3 mm available on request)
• Square electrode sheet punching for prismatic cell or pouch cell prototyping (25×25 to 50×50 mm)
• High-throughput manual disc production for batch coin cell fabrication in research labs
Related Products
• Manual Electrode Disc Punching Machine XN-HPM-24
• Pneumatic Electrode Die-Cutting Machine XN-PDC-120
• Semi-Automatic Electrode Die-Cutting Machine XN-PDC-280
• Browse the full Slitting & Die Cutting category.
