Automatic Dual-Station Electrolyte Filling and Standing Machine XN-PEIP-100
SKU: XN-PEIP-100
Automatic Dual-Station Electrolyte Filling and Standing Machine XN-PEIP-100 automates electrolyte dispensing and vacuum standing across two alternating stations. One station can stand filled cells while the dispensing head serves the other, supporting efficient cylindrical-cell laboratory and pilot-line workflows.
Need a bulk order or custom specification? Request a competitive quote today!
Name: Automatic Dual-Station Electrolyte Filling and Standing Machine
Equipment Type: Cylindrical Cell Electrolyte Filling and Vacuum Standing Machine
Product Code: XN-PEIP-100
Brand: Xnergy
Product Introduction:
The XN-PEIP-100 integrates automated electrolyte dispensing with two vacuum-standing stations. The dispensing head follows programmed XYZ positions to fill cells arranged on trays. After a station is filled, its vacuum cover lowers for standing while the dispensing head moves to the second station, allowing the two stations to alternate for higher throughput.
Key Features:
Integrated electrolyte filling and dual-station vacuum standing
Alternating stations reduce idle time between filling and standing
PLC and touch-screen recipe control
Programmable XYZ dispensing for tray-based cell processing
Adjustable fill quantity, speed, vacuum level and standing time
Welded vacuum chambers for reliable operation
Corrosion-resistant SUS304 and SUS316 critical components
Chemical-resistant inlet and outlet hoses
Suitable for dry-room or compatible glovebox integration
Operating Sequence:
1. Load cylindrical cells onto the tray and start the programmed recipe.
2. The XYZ dispensing head fills each cell at its programmed position.
3. The filled station closes for vacuum standing.
4. The dispensing head moves to the second station, and the two stations continue in alternating cycles.
Technical Specifications:
| Parameter | Specification |
|---|---|
| Process Functions | Automatic electrolyte filling and dual-station vacuum standing |
| Supported Cell Format | Cylindrical cells |
| Processing Capacity | Up to 100 cells per cycle, based on 18650 format |
| Filling Quantity | 0.1–200 g |
| Filling Accuracy | ±0.5% after filling |
| Dispensing Speed | 0.1–3 mL/s, adjustable |
| Adjustable Parameters | Filling speed, filling quantity, vacuum level and standing time |
| Vacuum Requirement | -98 kPa or better |
| Recommended Vacuum Pump | 2 L/s |
| Compressed Air | Approximately 0.5 MPa; dry, filtered and regulated |
| Wetted / Critical Parts | SUS304 and SUS316 corrosion-resistant materials |
| Control System | PLC with touch-screen interface |
| Rated Power | 1 kW |
| Machine Dimensions | 1160 × 450 × 820 mm |
| Control Box Dimensions | 530 × 450 × 255 mm |
| Net Weight | 150 kg |
| Electrical Standard | Configured to local electrical standards |
Application Areas:
Cylindrical lithium-ion and sodium-ion cell electrolyte filling
Vacuum-assisted electrolyte wetting and standing
Battery laboratory process development
Cylindrical-cell pilot-line assembly
Dry-room and compatible glovebox cell preparation
Note: Actual tray configuration and throughput depend on cell dimensions and process settings. For glovebox use, the working gas must match the glovebox atmosphere. Explore cylindrical-cell assembly equipment, cell assembly systems, the vacuum electrolyte filling and standing machine, and the battery vacuum standing machine.
