Compact Pneumatic Electrode Die Cutter XN-QMQ85
SKU: XN-QMQ85
XE-QMQ85 compact pneumatic die cutter for pouch battery cathode/anode electrode cutting. Max L85×W65mm, die life ≥30,000 cuts, no burrs or powder drop, four-pillar precision structure, glovebox Ar atmosphere compatible, no electricity required. Ideal for Li-S, Li-Air, and solid-state battery electrode preparation.
Need a bulk order? Request a competitive quote today!
Compact Pneumatic Electrode Die Cutter XN-QMQ85
Equipment Type: Compact Gas-Driven Electrode Die Cutter for Glovebox Use
Product Code: XN-QMQ85
Brand: Xnergy
Product Introduction
XN-QMQ85 is a compact, gas-driven electrode die cutter designed for producing pouch cell cathode and anode electrodes in environments where no electrical power is available — most critically, inside Ar-atmosphere gloveboxes used for moisture- and oxygen-sensitive electrode materials such as lithium metal, lithium sulfide, and solid-state electrolyte sheets. The unit operates from 0.5–0.7 MPa compressed gas (Ar inside the glovebox; air compressor outside), with a maximum cutting force of 1 ton and a 35 mm stroke. Four-pillar guidance delivers ±0.1 mm cut precision with burr-free edges across material thicknesses up to 0.5 mm. Die life is approximately 30,000 strokes, and dies are quick to change. CE certified.
Key Features
• No electricity required — fully pneumatic; uses the glovebox inert gas supply (Ar) or an external air compressor
• Glovebox-ready — compact form factor designed for use inside a glovebox; ideal for moisture/oxygen-sensitive electrode materials
• Max die area L85 × W65 mm — two standard electrode dies (cathode + anode) included; custom shapes available
• Four-pillar guide — smooth, high-precision vertical motion; ±0.1 mm cut accuracy
• Burr-free cutting — no burrs, powder drop, or indentation across materials up to 0.5 mm thick
• Die life ~30,000 strokes — long service interval; quick die changeover
• CE certified
Specification
| Parameter | Specification |
|---|---|
| Operation | Pneumatic, no electricity required |
| Max Die Cutting Size | L85 mm × W65 mm (custom shapes available) |
| Cutting Depth | Max. 0.5 mm (tested with aluminum laminated film) |
| Cutting Accuracy | ±0.1 mm |
| Max Cutting Force | 1 ton (0.5 ton recommended for battery electrodes) |
| Gas Pressure | 0.5 – 0.7 MPa (0.5 MPa recommended) |
| Gas Source | Inert gas (Ar) inside glovebox; air compressor outside |
| Stroke Length | 35 mm |
| Die Life | ~30,000 strokes |
| Standard Dies Included | 2 standard electrode dies (cathode + anode) |
| Feeding | Manual sheet feeding |
| Certification | CE certified |
Application Areas
• Lithium metal electrode cutting inside Ar-atmosphere glovebox for Li-S, Li-air, and solid-state batteries
• Moisture-sensitive cathode sheet die-cutting (sulfide solid electrolyte, LLZO composite sheets)
• Pouch cell prototype electrode preparation in inert-atmosphere environments
• Field or off-grid electrode preparation where electrical power is not available
• Portable die-cutting for small research labs with limited bench space
Related Products
• Precision Die Cutter for Pouch Cell Electrode Sheet XN-MQ280
• Pneumatic Electrode Die-Cutting Machine XN-PDC-120
• Hand-Held Electrode Disc Cutter XN-HHDC
• Browse the full Slitting & Die Cutting category.
