Heated Pellet Press Mold XN-HPY Series
SKU: XN-HPY
Heated Pellet Press Mold XN-HPY Series — 7-inch touchscreen heated pellet press mold system with 5-segment programmable temperature control (up to 300 °C or 500 °C), real-time MPa pressure display, and anti-scalding safety alert; available in four configurations with mold diameters of 3–20 mm or 21–25 mm for powder, film, rubber, and ceramic sample preparation.
Name: Heated Pellet Press Mold XN-HPY Series
Equipment Type: Pellet Press Mold
Product Code: XN-HPY
Brand: Xnergy
Product Introduction
The Xnergy XN-HPY series heated pellet press mold features a 7-inch touchscreen intelligent temperature controller with 5-segment programmable temperature control, enabling precise heating from room temperature up to 300 °C or 500 °C depending on model. The system automatically calculates and displays the actual pressure applied to the sample in MPa, with real-time temperature readout and anti-scalding safety alerts. Mold diameter options of 3–20 mm or 21–25 mm cover a wide range of sample sizes. Built-in data management supports storage, review, and export of experimental records — suitable for high-temperature, high-pressure pellet preparation of powders, plastic films, rubber, ceramics, and other solid materials. Ideal for spectral analysis, gem analysis, pharmaceutical chemistry, catalysis research, energy battery development, and metallurgical analysis in universities, research institutes, and industrial laboratories.
Key Features
7-inch touchscreen controller for intuitive, precise parameter input
5-segment programmable continuous and step temperature control
Heating range up to 300 °C (standard) or 500 °C (extended, -AG/-BG models)
Mold diameter options: 3–20 mm (A/AG) or 21–25 mm (B/BG)
Automatic MPa pressure conversion displayed in real time
Anti-scalding safety alert displayed during and after heating
Data management: store, view, and export experimental records
Compact controller: 230 × 270 × 180 mm, 3.5 kg
Power supply adapted to local electrical standards
Technical Specifications
| Parameter | XN-HPY-A | XN-HPY-B | XN-HPY-AG | XN-HPY-BG |
|---|---|---|---|---|
| Heating Range | RT – 300 °C | RT – 300 °C | RT – 500 °C | RT – 500 °C |
| Mold Diameter (optional) | 3–20 mm | 21–25 mm | 3–20 mm | 21–25 mm |
| Heating Core OD | 43 mm | 53 mm | 43 mm | 53 mm |
| Heating Jacket OD | 78 mm | 88 mm | 78 mm | 88 mm |
| Cavity Depth | 40 mm | |||
| Heating Jacket Power | 300 W / 400 W | |||
| Controller Temp Range | RT – 800 °C | |||
| Temp Control Mode | 5-segment programmable continuous and step control | |||
| Display | 7-inch touchscreen LCD | |||
| Display Precision | 0.1 T | |||
| Controller Dimensions | 230 × 270 × 180 mm | |||
| Controller Weight | 3.5 kg | |||
| Power Supply | Adapted to local electrical standards | |||
Storage
Clean all residue from the mold cavity and pressing rod immediately after each use; dry thoroughly before storage. Keep the touchscreen covered with a protective film when not in use. Remove dust, moisture, and conductive or corrosive contaminants from the screen and circuit areas promptly.
Note
Do not exceed the rated pressure or temperature limits of the mold. Prolonged operation at maximum temperature may shorten mold service life and is not recommended. If any abnormal behavior is observed, disconnect power immediately and contact Xnergy technical support.
See also: Pellet Press Equipment
