Split-Type Pouch Cell Top and Side Sealing Machine XN-HS-300-S
SKU: XN-HS-300-S
Split-Type Pouch Cell Top and Side Sealing Machine XN-HS-300-S provides top and side heat sealing up to 300 mm for aluminum-laminated pouch cells. Its separate working and control units support glove-box installation, with adjustable sealing pressure, room-temperature-to-250 °C heating, and automatic/manual operation.
Need a bulk order or custom specification? Request a competitive quote today!
Name: Split-Type Pouch Cell Top and Side Sealing Machine
Equipment Type: Split-Type Pouch Cell Heat Sealing Machine
Product Code: XN-HS-300-S
Brand: Xnergy
Product Introduction:
The XN-HS-300-S is designed for sealing the top and side edges of aluminum-laminated pouch lithium batteries. Its split structure separates the working unit from the control unit, making the compact sealing section easier to install and operate inside a glove box.
Resistance heaters transfer heat to copper sealing heads. Under controlled temperature and pressure, the aluminum-plastic film softens and fuses to form a flat, uniform seal. The same machine performs top and side sealing without replacing the sealing head.
Key Features:
Split working and control units for glove-box installation
Top and side sealing up to 300 mm
Copper sealing heads for efficient heat transfer
Room-temperature-to-250 °C adjustable sealing temperature
±2 °C temperature-control accuracy
Adjustable sealing pressure for different process requirements
Automatic and manual operating modes
Replaceable sealing blades for optional seal widths
Guided pneumatic actuation for parallel, uniform seals
Anti-scalding protection and material support table
Technical Specifications:
| Parameter | Specification |
|---|---|
| Applicable Cell Format | Aluminum-laminated pouch cells |
| Structure | Split working unit and control unit; glove-box compatible |
| Maximum Side Seal | ≤300 mm |
| Maximum Top Seal | ≤300 mm, including gas pouch |
| Sealing Blade Length | 300 mm |
| Gas-Pouch Edge Width | 15–90 mm |
| Seal Width | Standard 5 ± 0.4 mm; optional 3–10 mm with replaceable sealing blade |
| Side-Seal Thickness | 60–400 μm, depending on aluminum-plastic film thickness |
| Top Tab-Seal Thickness | Soft seal: 200–706 μm, depending on film thickness; hard-seal thickness customizable |
| Sealing Temperature | Room temperature to 250 °C, adjustable |
| Temperature-Control Accuracy | ±2 °C |
| Main Body to Seal Edge | 1–5 ± 0.4 mm, adjustable |
| Sealing Time | Standard 2–3 s; adjustable 0–99 s |
| Seal-Thickness Consistency | Difference between any two points <15 μm |
| Operation Modes | Automatic and manual |
| Compressed Gas | 5–8 kg/cm²; use gas compatible with the glove-box atmosphere when installed inside a glove box |
| Operating Speed | ≥400 cycles/hour |
| Rated Power | 0.5 kW |
| Working-Unit Dimensions | 415 × 150 × 290 mm |
| Control-Unit Dimensions | 320 × 240 × 220 mm |
| Equipment Weight | 25 kg |
| Electrical Configuration | Configured according to applicable local electrical standards |
Applications:
Pouch-cell top sealing
Pouch-cell side sealing
Aluminum-plastic film heat sealing
Glove-box pouch-cell assembly
Battery R&D and pilot-scale pouch-cell production
Operation and Maintenance:
Keep the equipment clean with a soft cloth and alcohol, lubricate moving parts regularly, and inspect screws, nuts, pins, and other fasteners for looseness. If the machine will remain unused, clean the moving components and apply suitable rust protection. Keep hands and other body parts away from moving and heated areas, and allow only authorized technical personnel to service the equipment.
Note: Seal width, hard-seal thickness, process pressure, gas compatibility, fixtures, and electrical configuration can be adapted to the required pouch-cell process. For shorter 200 mm glove-box sealing, see the XN-HS-200-S Split-Type Top and Side Sealing Machine. Related equipment includes the XN-HS-200 Top and Side Sealing Machine, XN-FVHS-200-F Split-Type Secondary Sealing Machine, and the XN-CF-200 Aluminum-Plastic Film Forming Machine. Explore more equipment in Pouch Cell Assembly.
