Vacuum Pre-Sealing Machine XN-VHS-200
SKU: XN-VHS-200
Vacuum Pre-Sealing Machine XN-VHS-200 evacuates and hot pre-seals pouch cells after electrolyte filling and standing. PLC touch-screen control and a split layout support glovebox or pilot-line integration.
Need a bulk order or custom specification? Request a competitive quote today!
Name: Vacuum Pre-Sealing Machine
Equipment Type: Pouch Cell Vacuum Pre-Sealing Machine
Product Code: XN-VHS-200
Brand: Xnergy
Product Introduction:
The XN-VHS-200 evacuates and hot pre-seals aluminum-plastic film pouch cells after electrolyte filling and standing. Its adjustable vacuum, temperature, pressure and sealing time support repeatable pouch-cell preparation. The split machine and control-box layout is suitable for glovebox or pilot-line use.
Key Features:
Vacuum evacuation and pouch-cell hot pre-sealing
PLC and touch-screen process control
Adjustable temperature, sealing pressure and sealing time
Copper sealing heads for efficient heat transfer
Linear-guided pneumatic sealing for parallel, repeatable motion
Transparent chamber window for process observation
Adjustable fixtures for different cell sizes
Split construction for glovebox or production-line integration
Technical Specifications:
| Parameter | Specification |
|---|---|
| Process Function | Vacuum evacuation and hot pre-sealing after electrolyte filling and standing |
| Supported Cell Format | Pouch cells |
| Vacuum Level | Adjustable down to -95 kPa; external vacuum pump required |
| Sealing Head Material | Copper |
| Sealing Temperature | Ambient to 250 °C, adjustable |
| Temperature Accuracy | ±2 °C |
| Heat-Sealing Pressure | 0–5 kg/cm², adjustable |
| Heat-Sealing Time | 0–99 s, adjustable |
| Seal Width | 5 ± 0.4 mm; customizable |
| Maximum Seal Length | 200 mm |
| Maximum Cell Size | 190 mm length including tabs; 160 mm width including gas pocket |
| Seal Thickness Range | 60–500 μm |
| Seal Thickness Accuracy | Difference between any two points <15 μm |
| Pneumatic Throughput | ≥180 cycles/h |
| Air Consumption | Approximately 0.2 L compressed gas per cycle |
| Compressed Air | 0.4–0.5 MPa |
| Control System | PLC with touch-screen interface |
| Vacuum Chamber | Corrosion-resistant aluminum-alloy chamber |
| Main Unit Dimensions | 470 × 485 × 435 mm |
| Control Box Dimensions | 420 × 325 × 225 mm |
| Heating Tube Power | 300 W |
| Heating Power Consumption | Approximately 0.6 kW |
| Electrical Standard | Configured to local electrical standards |
| Net Weight | Main unit 33 kg; control box 16 kg; total 49 kg |
Application Areas:
Pouch-cell aluminum-plastic film vacuum pre-sealing
Post-filling pouch-cell preparation
Battery laboratory and pilot-line assembly
Dry-room and glovebox battery preparation
Note: An external vacuum pump is required. Seal width, fixtures and process settings can be customized for the intended cell format. For glovebox operation, the cylinder working gas must be compatible with the glovebox atmosphere. Explore pouch-cell assembly equipment, cell assembly systems, the vacuum electrolyte filling and standing equipment, and related secondary vacuum sealing equipment.
