Xnergy XN-LATP-PE LATP oxide solid electrolyte pellet

LATP Oxide Solid Electrolyte Pellet XN-LATP-PE

SKU: XN-LATP-PE

LATP Oxide Solid Electrolyte Pellet XN-LATP-PE is a customizable LATP oxide solid electrolyte pellet with a 12–76 mm diameter or side-length range, 100–500 μm thickness, ≥95% relative density, and ≥0.45 mS/cm ionic conductivity.

Standard configuration: Round pellet. For other shapes, please contact us or leave a note with your requirements.

Need a bulk order or custom specification? Request a competitive quote today!

Name: LATP Oxide Solid Electrolyte Pellet XN-LATP-PE
Material Type: LATP Oxide Solid Electrolyte Pellet
Product Code: XN-LATP-PE
Material: LATP
Brand: Xnergy

Product Introduction:

XN-LATP-PE is a customizable LATP oxide solid-state electrolyte ceramic pellet for solid-state battery, ceramic electrolyte, and materials-characterization research. The supplied specification lists a 12–76 mm diameter or side-length range with ±0.5% tolerance and 100–500 μm thickness with ±5% tolerance.

Core Features:

  • Customizable LATP oxide electrolyte pellet
  • Uniform color with no visible cracks
  • 12–76 mm diameter or side-length range; ±0.5% tolerance
  • 100–500 μm thickness range; ±5% tolerance
  • ≥2.793 g/cm³ density and ≥95% relative density
  • ≥0.45 mS/cm ionic conductivity by EIS at 25 ± 2 °C
  • 90 ± 10 MPa flexural strength by three-point bending
  • XRD and EIS characterization figures supplied

Technical Specifications:

Parameter Specification
Product Type LATP oxide solid electrolyte pellet
Product Code XN-LATP-PE
Brand Xnergy
Material LATP
Customization Available
Appearance Uniform color; no visible cracks
Diameter / Side Length 12–76 mm; tolerance ±0.5%
Thickness 100–500 μm; tolerance ±5%
Density ≥2.793 g/cm³
Density Test Method Archimedes drainage method
Relative Density ≥95%
Main Crystal Phase PDF#35-0754
Phase Test Method XRD
Ionic Conductivity ≥0.45 mS/cm
Conductivity Test Condition EIS; ceramic pellet; 25 ± 2 °C
Flexural Strength 90 ± 10 MPa
Strength Test Method Three-point bending

X-Ray Diffraction:

The supplied XRD pattern is shown with the PDF#35-0754 reference pattern for phase comparison.

XRD pattern of LATP oxide solid-state electrolyte sheet

Electrochemical Impedance Spectroscopy:

The supplied EIS plot is labeled for a C19 mm, T200 μm sample measured at 25.5 °C.

EIS plot of LATP oxide solid-state electrolyte sheet at 25.5 °C

Applications:

  • All-solid-state battery electrolyte-pellet research
  • Ceramic electrolyte separator evaluation
  • Electrode–electrolyte interface studies
  • Electrochemical impedance and materials characterization
  • Custom-format laboratory cell development

Note: The standard specification for this product is a round pellet. For other shapes, please contact us or leave a note with your requirements. Reported values are based on the supplied product specification. Confirm final dimensions, tolerances, thickness, and acceptance criteria when requesting a custom pellet. Actual performance depends on component geometry, surface preparation, electrode contact, cell design, temperature, and test method. Explore the Oxide category and Solid-State Electrolytes.

Related products