XN-1532E 3200°C Joule Heating System for Laboratory Research
SKU: XN-1532E
XN-1532E 3200°C Joule Heating System is a dedicated single-model laboratory configuration with a stainless-steel vacuum chamber, 150–3200°C temperature range, millisecond pulse control, and 30 V / 150 A DC operation.
Need a bulk order or custom specification? Request a competitive quote today!
Name: High-Temperature Joule Heating System XN-1532E
Equipment Type: Laboratory High-Temperature Joule Heating System
Product Code: XN-1532E
Brand: Xnergy
Product Introduction:
Single-Model Technical Page: This page documents the dedicated XN-1532E laboratory configuration and its original 150–3200°C technical specification. For a side-by-side comparison of the current stainless-steel models, visit the XN-HTS-E Series Joule Ultrafast Heating System.
XN-1532E is a laboratory high-temperature Joule heating system capable of reaching 150–3200°C through resistive Joule heating of a sample held between copper electrodes inside a stainless steel vacuum chamber. A dual-stage rotary vane vacuum pump evacuates the chamber to 6 × 10−2 Pa, or the chamber can be backfilled with protective gas (N₂ and similar). A 30 V / 150 A DC power supply drives the heating current; the system supports manual/automatic modes, pulse heating (minimum pulse width 1 ms, 1–100 pulse count), 6-stage segmented programming, and programmable ramp heating. A touchscreen panel displays real-time temperature, current, and voltage; data are acquired at sampling frequencies of 100 Hz to 10 kHz via RS485 + USB. An AI-assisted analysis module supports preprocessing of XRD, BET, SAXS, electrochemical, temperature, energy, and TEM data, and data analysis using SVM, RF, Neural Networks, and Bayesian networks for material electrochemical performance prediction.
Key Features:
- Temperature range: 150–3200°C; heating rate: ≥1000°C / 100 ms
- Vacuum chamber: stainless steel with observation window; inner dimensions 20 × 30 × 30 cm
- Dual-stage rotary vane vacuum pump; ultimate pressure 6 × 10−2 Pa; speed 1400 r/min
- DC power supply: 30 V / 150 A; rated power 4500 W; input 220 V / 50 Hz
- Pulse heating: minimum pulse width 1 ms; pulse count 1–100
- 6-stage segmented control; programmable ramp heating
- Data acquisition: temperature, voltage, current; sampling frequency 100 Hz – 10 kHz
- Data communication: RS485 + USB
- Working atmosphere: vacuum or protective gas (N₂, etc.)
- AI-assisted analysis: XRD, BET, SAXS, electrochemical, TEM preprocessing; SVM / RF / Neural Network / Bayesian network analysis
- High-temperature copper electrodes (2 pcs)
| Parameter | Specification |
|---|---|
| Temperature Range | 150–3200°C |
| Temperature Accuracy | ±5% |
| Temperature Repeatability | ±3% |
| Heating Rate | ≥1000°C / 100 ms |
| DC Power Supply | 30 V / 150 A |
| Rated Power | 4500 W |
| Input Power | 220 V / 50 Hz |
| Vacuum Chamber | Stainless steel with observation window; 20 × 30 × 30 cm (inner) |
| Vacuum Pump | Dual-stage rotary vane; ultimate pressure 6 × 10−2 Pa; 1400 r/min |
| Vacuum Gauge | −0.1 MPa |
| Pulse Parameters | Min. pulse width 1 ms; pulse count 1–100 |
| Data Acquisition Sampling | 100 Hz – 10 kHz (adjustable) |
| Data Communication | RS485 + USB |
| Working Atmosphere | Vacuum or protective gas (N₂, etc.) |
| High-Temperature Electrodes | Copper electrodes × 2 |
| Dimensions (L × W × H) | 100 × 80 × 60 cm |
| Weight | 60 kg |
Note: This page covers the dedicated XN-1532E single-model configuration. To compare XN-HTS-1532E, XN-HTS-7026E, and XN-HTS-3018E, see the current XN-HTS-E stainless-steel Joule heating series. For conventional tube sintering under controlled atmosphere, see the Tube Furnace XN-TF-1600 or Muffle Furnace XN-MF-1600.
