Shanshan T31D NCM Cathode Material 1kg

Name: Shanshan T31D NCM Cathode Material

Material Type: High-Capacity Lithium Nickel Cobalt Manganese Oxide (NCM) Cathode Material

Product Code: T31D

Brand: Shanshan

Product Introduction:

The Shanshan T31D is a high-capacity lithium nickel cobalt manganese oxide (NCM) cathode material. Through optimized Li ratio and advanced sintering equipment combined with optimized sintering protocols, the product achieves favorable pH and residual lithium control along with high specific capacity, good cycle performance, and excellent processing properties. The material is supplied as a black powder with D50 10.50 μm, tap density 2.500 g/cm³, and specific surface area 0.250 m²/g. The T31D is applicable to cylindrical and prismatic capacity-type lithium-ion battery systems, used alone or blended.

Key Features:

High-capacity NCM chemistry — total Ni+Mn+Co content 58.5 wt%
First-cycle discharge capacity 170.5 mAh/g at 0.1C, 3.0–4.3 V (CR2032 coin cell)
First-cycle efficiency 89.50%
Particle size distribution — D10 6.00 μm / D50 10.50 μm / D90 18.50 μm / D99 28.50 μm
High tap density 2.500 g/cm³ supports high electrode loading
Low specific surface area 0.250 m²/g
Low moisture content 200 ppm
Low impurity content — Fe 35.0 ppm, Na 45.0 ppm, Cu 2.0 ppm
SGS-tested, compliant with EU RoHS 2002/95/EC and subsequent amendments
MSDS available

Chemical Composition & Impurities:

Particle Size Distribution (PSD):

Particle size distribution curve:

Physical Properties:

SEM Morphology:

SEM imaging (×3000) shows the characteristic particle morphology of the T31D NCM cathode material.

Electrochemical Performance (CR2032 Coin Cell, 0.1C/0.1C, 3.0–4.3 V):

Charge/Discharge curve:

Values measured by Xnergy. Typical values for reference; not guaranteed unless otherwise specified.

Application Areas:

The Shanshan T31D is applicable to cylindrical and prismatic capacity-type lithium-ion battery systems, used alone or blended with other cathode materials.

Handling & Storage:

The material is moisture-sensitive — please control environmental humidity as low as possible during handling and use, and use the material promptly after opening the packaging. SGS-tested and compliant with EU RoHS 2002/95/EC and subsequent amendments. MSDS is available on request.

Note: Specifications listed above are typical and for reference only. Actual electrochemical performance depends on the specific cell architecture, electrolyte formulation, binder/conductive-additive composition, coating thickness, calendering parameters, formation protocol, and testing conditions. For complete lithium-ion battery electrode preparation workflows, see also Xnergy’s related products in the Cathode Materials category, Anode Materials category, Binders category, and Current Collectors category. For electrode-coating equipment, see the Coating equipment category including Automatic Film Coater XN-VC-300, XN-VCH-300, and Slot-Die Coating System XN-SDC. For electrode calendering, see the Calendering equipment category. For mixing and drying, see Planetary Vacuum Mixer and Three-Door Vacuum Drying Oven (XN-DVO-3). For other NCM cathode materials in our catalog, see also Zhenhua E-Chem Single-Crystal NCM523 Cathode, Zhenhua E-Chem NCM613 Cathode, EASPRING ME-93SC Single-Crystal NCM Cathode, Ronbay S8303 Single-Crystal NCM811 Cathode, Ronbay S760 Polycrystalline NCM613 Cathode, BTR M2-S Single-Crystal Ni83 NCM Cathode, and BTR M9-FC Polycrystalline NCM Cathode.