Tissue Grinder XN-YZ Series
SKU: XN-YZ
Tissue Grinder XN-YZ Series is a fast, efficient, multi-tube system for extracting and purifying DNA, RNA, and protein from a wide range of sources — including soil, plant and animal tissues, bacteria, yeast, fungi, spores, and ancient biological specimens. It is also known as a multi-sample tissue homogenizer or fast sample homogenization system.
Sample tubes stay fully closed during crushing to avoid cross-contamination, disposable centrifuge tubes and beads can be used, and a built-in program controller sets grinding time and vibration frequency.
Need a bulk order or custom specification? Request a competitive quote today!
Name: Tissue Grinder XN-YZ Series
Equipment Type: Tissue Grinder (Multi-Sample Homogenizer)
Product Code: XN-YZ
Brand: Xnergy
Product Introduction:
The XN-YZ Tissue Grinder is a fast, efficient, multi-tube system for grinding and homogenizing biological samples. It can extract and purify raw DNA, RNA, and protein from almost any source, including soil, plant and animal tissues and organs, bacteria, yeast, fungi, spores, and ancient biological specimens. The machine is also known as a multi-sample tissue grinder, fast tissue grinder, multi-sample tissue homogenizer, or fast sample homogenization system.
Key Features:
High throughput with good results — grinds 24 samples in about 1 minute
No cross-contamination: sample tubes stay fully closed during crushing, and disposable centrifuge tubes and beads can be used
Easy to operate, with a built-in program controller for setting parameters such as grinding time and rotor vibration frequency
Adapter Options:
Adapter material: Metal, Nylon, or PTFE
Tube sizes: 0.2 mL, 1.2 mL, 1.5 mL, 2.0 mL, 5.0 mL, 15 mL, 50 mL
Hole counts: 2, 4, 6, 12, 24, 48, 64, and 96 holes
Adapter Sample Volume by Model:
| XN-YZ12 | XN-YZ24 | XN-YZ48 | XN-YZ64 | XN-YZ96 |
|---|---|---|---|---|
| 12 × 5 mL 8 × (7–15) mL 4 × 25 mL 2 × 50 mL |
24 × (0.2–0.5 mL) 24 × 2 mL 16 × 5 mL 12 × 5 mL 8 × (7–15) mL 4 × 25 mL 2 × 50 mL |
48 × (0.2–0.5 mL) 48 × 2 mL 24 × 2 mL 16 × 5 mL 12 × 5 mL 8 × (7–15) mL 4 × 25 mL 2 × 50 mL |
64 × (0.2–2 mL) 64 × 2 mL 2 × 2 mL 16 × 5 mL 12 × 5 mL 8 × (7–15) mL 4 × 25 mL / 2 × 50 mL |
96 × (0.2–0.5 mL) 96 × 2 mL 48 × 2 mL 24 × 2 mL 16 × 5 mL 12 × 5 mL 8 × (7–15) mL 4 × 25 mL 2 × 50 mL |
General Specifications:
| Parameter | Specification |
|---|---|
| Final Fineness | About 5 μm |
| Grinding Method | Dry grinding, wet grinding, low-temperature grinding |
| Mass Average Speed | 10–70 Hz/s |
| Voltage | Configurable according to local electrical standards. |
| Weight | 40 kg |
Application Areas:
Fast extraction and purification of DNA, RNA, and protein
Homogenization of plant and animal tissues and organs
Disruption of bacteria, yeast, fungi, and spores
Processing of soil, ancient biological specimens, and other difficult samples
High-throughput, multi-sample laboratory sample preparation
Maintenance:
Use disposable tubes and beads and replace them between samples to prevent cross-contamination
Clean the adapters after use and check them for wear
Keep the control panel and chamber clean and dry
Confirm tubes are properly seated and balanced before each run
Safety Notes:
Ensure sample tubes are securely closed and the adapter is balanced before starting
Keep the lid closed during operation
Do not exceed the adapter’s rated tube count or volume
Set the vibration frequency and time appropriately for the sample
Specifications are provided for reference and may be adjusted to suit specific process requirements. Adapter material, configuration, and model are specified at order time.
Note: Specifications listed above are typical and for reference only. Actual performance depends on the sample, tubes, and beads. The XN-YZ Tissue Grinder is a high-throughput, multi-tube homogenizer that grinds up to 96 closed sample tubes per run for fast DNA, RNA, and protein extraction, with no cross-contamination and dry, wet, or low-temperature grinding. Adapters are available in metal, nylon, or PTFE across a wide range of tube sizes and hole counts. For other Xnergy laboratory grinding needs: cryogenic grinding of temperature-sensitive samples is handled by the XN-YD-XQM Liquid-Nitrogen Cooling Ball Mill or the air-cooled XN-XH-XQM Cooling Ball Mill; fine single-sample grinding by the XN-MT-120 Agate Mortar Grinder; and general planetary ball milling by the XN-YXQM Series.
