In-Situ Raman Battery Test Cell XN-GT06
In-Situ Raman Battery Test Cell XN-GT06
In-Situ Raman Battery Test Cell XN-GT06
In-Situ Raman Battery Test Cell XN-GT06
In-Situ Raman Battery Test Cell XN-GT06
In-Situ Raman Battery Test Cell XN-GT06
  1. In-Situ Raman Battery Test Cell XN-GT06
  2. In-Situ Raman Battery Test Cell XN-GT06
  3. In-Situ Raman Battery Test Cell XN-GT06
  4. In-Situ Raman Battery Test Cell XN-GT06
  5. In-Situ Raman Battery Test Cell XN-GT06
  6. In-Situ Raman Battery Test Cell XN-GT06

In-Situ Raman Battery Test Cell XN-GT06

SKU: XN-GT06

$268.00

In-Situ Raman Battery Test Cell (XN-GT06) — a Raman test mold with side cross-section observation through a high-transmittance quartz window, for in-situ Raman measurement during electrochemical cycling. 20 mm sleeve diameter, 90 mm assembly height, Φ6–20 mm inner diameter, ≤500 MPa working pressure. Built from stainless steel, PEEK and Grade 4 steel, with a polished electrode-post end face. Frame raisable on request.

Need a bulk order? Request a competitive quote today!

In-Situ Raman Battery Test Cell XN-GT06

Mold Type: Raman Test Mold with Side Cross-Section Observation
Product Code: XN-GT06
Brand: Xnergy

Product Introduction

The XN-GT06 is an in-situ Raman battery test cell with side cross-section observation. Through a high-transmittance quartz window, it provides optical access to the side cross-section of the cell, allowing Raman spectroscopic measurement during electrochemical cycling.

Key Features

• High-transmittance quartz observation window — heat-resistant, strong-acid resistant, thermally stable and electrically insulating. Quartz transmits well across the whole UV-to-infrared band, with visible-light transmittance over 93% and UV-region transmittance up to 80%.
– Side cross-section observation for in-situ Raman measurement of the cell side.
– High-precision machining — the electrode-post top is polished for a flat end face, with dimensional tolerances strictly controlled within a very small range for high mold stability.
– Selected special steel with stable performance.

Selected Materials

Stainless steel · PEEK · Grade 4 steel

Specification

Parameter Specification
Model XN-GT06
Sleeve Diameter 20 mm
Assembly Height 90 mm
Inner Diameter Φ6–20 mm
Material Stainless Steel, PEEK, Grade 4 Steel
Maximum Working Pressure ≤500 MPa

Package Contents

• Frame ×1
– Top cover ×1
– Insulating sleeve ×1
– Electrode column ×2
– Spring washer ×2
– Nut ×2

Application Areas

• New Energy
– Lithium Battery Research
– Research Projects
– Electrochemistry
– Mold Customization
– Solid-State Battery

Customization

The electrode post is supplied at a default diameter of Φ10 mm. Customizable as required; the frame can be raised at no extra cost.

Note: For end-face Raman testing, see the XN-GT16; for in-situ optical microscopy, the XN-GT07; and for low-profile microscopic observation, the XN-GT08. Browse the full range under Battery Molds.

Related products